Free quote
Tampa to Naples

Pool Tile Bead Blasting

Pool tile bead blasting is wet blasting. A blast kit on a commercial pressure washer mixes soda or glass bead media into the water stream and strips calcium off the tile, leaving the glaze and grout intact.

It is the fastest way to bring back a crusty white or gray tile line without draining the pool or replacing tile.

  • No draining with soda media
  • Done in hours, not days
  • Homes, rentals & HOAs

Get a free tile cleaning quote

Tampa to Naples. No obligation.

When bead blasting is the right choice

  • White or gray crust that brushing, pumice and tile cleaners will not move
  • Rough, sandpaper-feeling scale at the water line
  • Scale on spa walls, spillovers and waterfalls
  • Before selling or renting a home, or after a long vacancy
  • Commercial and HOA pools with heavy buildup

Soda or glass bead: choosing the media

MediaBest forPool water
Soda blast (sodium bicarbonate)Most calcium carbonate, glass and glazed tile, routine cleaningsPool stays filled, lowered to the tile line. Soda dissolves in the water.
Glass beadVery thick or hard calcium silicate scaleBest on drained pools. Glass does not dissolve and must be cleaned up.

Your pro picks the media after seeing how thick the scale is and whether the pool will stay filled.

Bead blasting vs. other methods

MethodGood forDrawbacks
Brushing / tile soapLight film, weekly upkeepDoes not remove hardened scale
Pumice stoneSmall spots on some tileSlow, can scratch glazed and glass tile
Acid treatmentSome calcium carbonateCan etch grout and tile, weak on silicate scale
Vinegar, CLR, tile cleanersVery light filmRarely move built-up scale
Wet blasting (soda or glass bead)Heavy carbonate and silicate scale, whole tile lines, in hoursNeeds a pressure washer, blast kit and trained operator

What to expect on the day

  1. The pro checks the tile type and scale thickness and agrees the price.
  2. The water is lowered to where the tile meets the plaster.
  3. The blast kit is hooked to a 3,000+ PSI pressure washer and loaded with media.
  4. Tile is wet blasted section by section, then rinsed.
  5. The pool is refilled and the water rebalanced, since soda media raises alkalinity.

Pricing

Most pros price by the linear foot, starting around $10–12 per foot. See the cost calculator or learn about calcium removal.

Questions

What media is used?

Soda blast media (sodium bicarbonate) for most pools that stay filled, because it dissolves in the water. Glass bead for very thick scale, mainly on pools that are drained, because glass does not dissolve and has to be cleaned up.

Does soda media affect my water?

Dissolved baking soda raises alkalinity and pH a little, so the water is tested and balanced after the job. Your pool service can handle it, or ask the pro.

Is the area left messy?

Soda media dissolves into the pool water. Glass bead bounces off the tile and must be swept and vacuumed up, which is why pros save it for drained pools or contained areas.

Can bead blasting remove calcium silicate?

Yes. Calcium silicate is the hard gray-white scale that acids barely touch, and blasting is the usual way to remove it.

Does the pool need to be empty?

No. The water is lowered to where the tile meets the plaster and the pro uses soda media. Draining is only needed if you want glass bead on very heavy scale.

Get your pool tile looking new again.

Get a free quote