Free quote
Tampa · Sarasota · Cape Coral · Naples

Pool Tile Cleaning & Calcium Removal on Florida's Gulf Coast

That white crust or gray line on your pool tile is calcium scale. Vinegar, CLR and store-bought tile cleaners barely touch it. Wet blasting with soda or glass bead media, run off a commercial pressure washer, removes it in hours instead of days, with no draining.

We match homeowners, vacation rental owners, HOAs and commercial pools from Tampa to Naples with local pool tile cleaning pros.

  • No draining with soda media
  • Done in hours, not days
  • Homes, rentals & HOAs

Get a free tile cleaning quote

Tampa to Naples. No obligation.

What pool tile cleaning includes

  • Tile line bead blasting to remove calcium carbonate and hard calcium silicate scale (see pool tile bead blasting)
  • Stain and water line removal: oils, sunscreen and mineral stains at the water level
  • Spa, spillover and waterfall tile cleaned at the same visit
  • Stone coping and accent tile on request
  • Refill and water balance tips so scale comes back slower (see pool calcium removal)

How it works

  1. Request a quote. Tell us your area and what the tile looks like. Photos help.
  2. Get a price. Most pros price by the linear foot of tile.
  3. Water lowered. Down to where the tile meets the plaster. The pool is not drained.
  4. Wet blast. A blast kit on a 3,000+ PSI pressure washer sprays soda media, which dissolves in the pool water, or glass bead for very thick scale.
  5. Refill and balance. The pool is refilled and back in use the same day in most cases.

Why bead blasting beats scrubbing and acid

Vinegar, baking soda paste, CLR and hardware-store tile cleaners rarely move built-up scale. Pumice is slow and can scratch, and acid can etch grout and still leave hard calcium silicate behind. Wet blasting mixes media into a high-pressure water stream and knocks scale off evenly. A tile line that would take days to scrub is usually done in a few hours.

What it costs

Local pros typically start at $10–12 per linear foot of tile. Measure around the pool at the water line to get your footage, or use the pool tile cleaning cost calculator. Heavy scale, spas, raised walls and difficult access can add to the price.

Commercial and HOA pools

Condo, HOA, hotel and community pools build scale fastest because of heavy use. Work can be scheduled around opening hours. See commercial pool tile cleaning.

Areas we serve

From Tampa Bay to Naples, including Tampa, St. Pete, Bradenton, Lakewood Ranch, Sarasota, Venice, Port Charlotte, Cape Coral, Fort Myers, Naples. See all service areas.

Questions

How much does pool tile cleaning cost?

Local pros typically start at about $10–12 per linear foot of tile. A common home pool has roughly 80–120 feet of tile line, so many jobs land around $800–$1,450, more with a spa or heavy scale. Use the cost calculator for a ballpark.

Do you drain the pool?

No. The water is usually lowered just below the tile line, the tile is cleaned, then the pool is refilled and the water balanced.

Will bead blasting damage my tile or grout?

Wet blasting with soda media knocks off calcium without harming glazed or glass tile. Heavier glass bead is saved for very thick scale. The pro checks your tile and can test a small area first.

How long does it take?

Most residential tile lines take a few hours of blasting, plus time to lower and refill the water.

What causes the white line on pool tile?

Calcium in Florida water comes out of solution as water evaporates, especially when pH runs high or with salt systems. Over time it hardens into scale.

Get your pool tile looking new again.

Get a free quote